BMX

BMX
View as
Sort by
Display per page
Manufacturer : Bontrager

Satellite Trekking Handlebars (35-degree)

- Traditional trekking 35-degree back sweep handlebar - 6061-T6 polished aluminum with clear anodize or black anodize finish - RIDE+ versions have an integrated cable guide inside

$18.75
Manufacturer : Bontrager

Satellite Trekking Handlebars (20-degree)

- Traditional trekking 35 degree back sweep handlebar - 6061-T6 polished aluminum with clear anodize or black anodize finish - RIDE+ versions have an integrated cable guide inside

$25.00
Manufacturer : SE Excp

Rodeo Bullhorn Alloy Bar

- Wide center profile for on-the-top spinning and a 205mm forward extension with upswept ends for sprints in the city or on the track - Can be used with track grips, bar-end shifters, or brake levers if needed - 1-piece 6061-T6 aluminum construction for a

$49.99
Manufacturer : WeThePeople

Turmoil Bolt-Drive Sprocket

WeThePeople's Turmoil Bolt Drive Sprocket is a beautifully-crafted aluminum ring that fits your 19mm or 22mm spindle. CNC machined from 7075 aluminum and finished with a hard, anodized coating make this sprocket insanely strong. Simply bolt it on to your crank arm and get going. No need for any turmoil with this sprocket. • 23.8mm spindle hole with adaptors for 19mm and 22mmspindles • 6.35mm thick • Fits 48-spline, 19mm spindle

$79.99
Manufacturer : WeThePeople

Tripod Seat Post

WeThePeople's Tripod Seatpost is made from strong, lightweight 6061 aluminum. The Tripod design is stronger and has more structural support than Pivotal seat/post combos. It uses a 3-point mounting system, where two rear supports press into channels underneath a Tripod seat, and a single bolt up front secures the system.

$47.99
Manufacturer : WeThePeople

Toxic Pegs

Grind the night and day away on WeThePeople's Toxic Pegs. The Toxic pegs are sold in pairs, so choose whether you want a set of 3/8-inch pegs or a mixed pair with one 3/8-inch and one 14mm peg. Material: 4140 heat-treated chromoly Length: 4" (101.6mm) Size: 2 x 3/8" or 3/8'' / 14mm combo Outer diameter: 1.33“ (34mm) Features: • Double-butted dent prevention design • Anti-spin bolts • Smaller diameter - less dents and more peg clearance

$48.99
Manufacturer : WeThePeople

Team Tripod Fat Seat

WeThePeople's Team Tripod Fat Seat is built tough to handle the demands of BMX riding. The durable Cordura cover can handle crash after crash, dust itself off, and go back for more. The Tripod design is stronger and has more structural support than Pivotal seat/post combos. It uses a 3-point mounting system, where two rear seatpost supports press into channels underneath the seat, and a single bolt up front secures the system.

$49.99
Manufacturer : WeThePeople

Team Pivotal Seatpost

WeThePeople's Team Pivotal seatpost is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and it's 200mm long for plenty of adjustability.

$47.99
Manufacturer : WeThePeople

Supreme Seat Clamp, 25.4mm

WeThePeople's Supreme Seat Clamp is great for adding a little bit of bling to your ride. This clamp is CNC machined from lightweigh 6061 aluminum and it works with standard BMX 25.4mm seatposts.

$24.99
Manufacturer : WeThePeople

Supreme Bar Ends

Protect your bars and prevent your grips from getting shredded with WeThePeople's Supreme Bar Ends. CNC machined from 6061 aluminum, these tough, bolt-in end caps protect your investment from tons of abuse when you have to jump ship on an imperfect execution of a trick. Simply slide them into the ends of your handlebars and tighten them up. Then, go nuts!

$41.99
Manufacturer : WeThePeople

Sterling - Pete Sawyer Signature Handlebar

WeThePeople team rider, Pete Sawyer is extremely particular when it comes down to designing signature parts. WethePeople's Sterling handlebar is the result of Pete's pursuit of perfection, and now you can have this sweet bar for your whip. Crafted from 7/8-inch, multi-butted tubing, the full-liquid post heat-treated M2 chromoly stands up to insane abuse, so go ahead and get rowdy. Measuring up at 9.2" tall and with a comfortable 3 degrees of upsweep, if you're looking for a bar on the bigg

$0.00
Manufacturer : WeThePeople

Socket Pivotal Post

WeThePeople's Socket Pivotal seat post is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and comes in the perfect color and size to match your bike. Plus, there's a 17mm socket head built into the bottom of the post for park-side adjustments to your wheels.

$59.99
Manufacturer : WeThePeople

Seatpost Clamp Bolt & Nut (Clash, Envy, Dawn, Crea

Don't fret if you've lost or stripped the original bolt to your WeThePeople Clash, Envy, Dawn, Cream, Sterling, or Utopia frame. This replacement seatpost clamp bolt and nut will get back out there in no time.

$9.99
Manufacturer : WeThePeople

Seatpost Clamp Bolt & Barrel (Scorpio and Patron F

If you've lost or stripped the original bolt to your WeThePeople Scorpio or Patron frame, get this replacement seatpost clamp bolt and get back out there.

$9.99
Manufacturer : WeThePeople

Raptor Grips

Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter • 30 durometer rubber • Low flange design • Includes WeThePeople nylon barends

$17.99
Manufacturer : WeThePeople

Patron Handlebars

WeThePeople's Patron bar has it all. Made from WTP's proven full-liquid post heat-treated 4130 “M2“ chromoly, the Patron bar is the choice of most team riders, and it's available in a selection of different colors and sizes to perfectly match your style and needs.

$0.00
Manufacturer : WeThePeople

Patron Fork

WeThePeople's Patron fork is all about choices. The 7mm full-investment casted heat-treated hollow dropouts are what make this fork so special and are offered in either a traditional 35mm offset or a more street orientated 25mm version for all the front-wheel jedis out there. This is the go to choice for most of the WTP pro team, so you know it's got to be good. • Material: Full-liquid post heat-treatment on 4130 “M2“ chromoly • Steerer Length: 170mm • Offset: 25

$0.00
Manufacturer : WeThePeople

Mad Max - Max Gaertig Signature Handlebar

Ride insane lines and combos like Mad Max Gaertig with WeThePeople's Mad Max Handlebar. Its multi-butted, 7/8-inch tubing is drawn from full-liquid post heat-treated M2 chromoly. With a tall 9.5-inch rise and a massive 30-inch spread, these bars are ready for you to push your limits.

$0.00
Manufacturer : WeThePeople

Hilt Flangless Grip

Grip it and rip with WeThePeople's Hilt flangless grips. The soft VEX rubber compound conforms to your hand, but is still incredibly rugged. Flangless grips allow your hands to move and grip freely when nailing technical tricks. Material: VEX rubber compound Size: 145mm x 29.5mm Specials: Clean, simple rib design without flange; includes WeThePeople nylon barends

$17.99
Manufacturer : WeThePeople

Hilt Flanged Grip

Grip it and rip with WeThePeople's Hilt flanged grips. The soft VEX rubber compound conforms to your hand, but is still incredibly rugged. Medium-height flanges keep your hands where you want when things get rowdy in the park. Material: VEX rubber compound Size: 145mm x 29.5mm Specials: Clean, simple rib design with flange; includes WeThePeople nylon barends

$17.99
Manufacturer : WeThePeople

Helix Rear Hub Guard for 14mm Regular Axles

Protect your beautiful Helix hub on grinds with WeThePeople's Helix Rear Hub Guard. Made from 7075 aluminum with a tough inner steel core, this guard perfectly fits the non-drive side of your Helix rear hub. Grind with confidence!

$39.00
Manufacturer : WeThePeople

Helix Rear Driver Guard for 14mm Regular Axles

WeThePeople's Helix Rear Driver Guard protects the driver on your beautiful Helix hub during grinds. Made from 7075 aluminum with a tough inner steel core, this guard perfectly fits the drive-side of your Helix rear hub. Grind with confidence!

$48.00
Manufacturer : WeThePeople

Helix rebuild kit

Rebuild or modify your WeThePeople Helix hub with this kit. Includes: • Axle • Cone set • Nuts • Washers • Slack adjusters

$52.00
Manufacturer : WeThePeople

Grippin 20 x 2.25" Tire

WeThePeople's Grippin tire is an excellent all-around tire. With a semi-tread design and a durable, grippy rubber compound, this tire can rail dirt berms and vert ramps alike.

$49.99
Manufacturer : WeThePeople

Feelin 20 x 2.25" Tire

WeThePeople's Feelin tire has a slick-tread design with a durable, grippy rubber compound, making it an awesome choice for the street and park.

$57.50
Manufacturer : WeThePeople

Compact Headset With Spacers

WeThePeople's Compact Headset gives you super-smooth steering and the ability to get those barspins and tailwhips dialed. Specs: top cap/ first spacer designed as one with 3mm, 5mm, 8mm and 10mm alloy spacers Special: includes all necessary hardware (washers, bearings, and spacers) Weight: 104g (3.7oz)

$54.99
Manufacturer : WeThePeople

Arrow 146 Grips

WeThePeople's Arrow 146 Grips have the perfect texture and density to give you newfound confidence while railing it on the bike. Material: VEX rubber compound Size: 146mm x 28mm Specials: soft angled rib design with medium-sized flange; includes WeThePeople nylon barends

$17.99
Manufacturer : WeThePeople

Arrow 115 Grips

WeThePeople's Arrow 115 Grips have the perfect texture and density to give you new confidence while railing it on the bike. Material: VEX rubber compound Rubber durometer: 30° Size: 115mm x 28mm Specials: soft angled rib design with medium-sized flange; includes WeThePeople nylon barends

$17.99
Manufacturer : WeThePeople

7000 Top Cap

Material: premium quality 7075-T6 alloy topbolt plus washer Size: M24 x 1.5mm pitch (fits to 2011/ 2012/ late 2013 and 2014 forks) Weight: 33g (1.12oz : 0.07lbs)

$24.99
Manufacturer : Profile Designs

F-35 Velcro Back Pad

Profile Design's Lux Pads keep both performance and comfort high, exactly where they need to be when you're pushing your boundaries. These velcro backed pads fit Profile Designs F-35 armrests (sold separately), and feature EVA foam, an anti-microbial cover, and a contoured edge for improved long-term comfort. They're even available in three thicknesses so you can dial in your fit to perfection.

$39.99

We're more than just bikes.

United Cycle is full of memories—from the first time our family business opened its doors right here in the heart of Old Strathcona, to the hundreds of races and rides we’ve held, or helped get off the ground. Read More

Call us 1.800.361.8776

© 2016. United Cycle. All rights reserved.